 |
GALVANISED GAS BOX
Pre-fabricated, sealed compartments to accommodate 9kg cylinder. Mostly
used in small motor-home conversions. Does not include door. Note: Gas
cylinder not included.
505mmH x
360mmW x 360mmD
2512-010 |
|
 |
FRAMED GAS BOX DOOR
Vented aluminium door to
suit the galvanised gas box. Mill finish frame. Choice of infil
aluminium colour and profile, and hinge position. Specify infill colour
and hinge location.
500mmH x
350mmW
2512-011 |
|
 |
FIBREGLASS GAS BOX
Holds 4kg
cylinder.
Note: Gas cylinder not included.
425mmH x
270mmW x 320mmD
2512-020
Replacement part
2512-021
Door |
|
 |
GAS CYLINDERS - 9kg
Cylinder with POL valve. Approved for external
mounting. Optional contents gauge.
2515-001
Standard
2515-002
With gauge
2515-501
Galvanised |
|
 |
GAS
CYLINDERS - 4kg
With POL
valve.
2515-021
Standard |
| |
 |
GAS CYLINDER
- 2kg
3/8" left
hand thread.
2515-102 |
|
 |
HARDWARE
KIT
For
fibreglass gas box. Consists of plastic snap vent, 2 x offset hinges and
cylinder lock.
2512-025 |
|
 |
GAS
CYLINDER CRADLES
Adjustable steel retaining cradles for A-frame mounted gas cylinders.
Sized to suit MANCHESTER cylinders.
2511-005
4kg Universal -Unpainted
2511-006
9kg Universal -Unpainted |
|
 |
CRADLE UNIVERSAL
Zinc
plated with extra strong base.
2511-007
4kg bottle
2511-009
9kg bottle |
|
 |
LP GAS
DETECTOR SAFE-T-ALERT
A 12 volt
gas detector that only draws 46mA and is simple to operate. A yellow
warm up light turns green after the 3 minute power up cycle. When the
test switch is activated a complete diagnostic test is performed in an
instant, - no gas required! The Safe-T-Alert features a double check
circuit to prevent alarm from a puff of hair spray, cleaner or other
aerosol sprays. The detector is fully operational from 6 to 16 volts DC,
thereby providing continuous operation until the battery is almost dead.
0021-010 |
| |
 |
GARVAN 12V GAS DETECTOR
G2000. Intended to detect leakage of natural gas,
town gas and bottled gas. It is intended for installation in caravans
and boats. Complete with mounting bracket and screws. 85mm x 85mm x 35
mm depth.
0021-022 |
|
 |
OVER
PRESSURE REGULATOR (MANUAL CHANGE OVER)
AGA
approved. Twin bottle applications. Integrated standard vent combination
with double manual changeover. 6kg/hour. Dual P.O.L. type inlet. 3/8"
female outlet. Comes with mounting bracket and fixing screws.
2521-0 023
Optional Rubber Pigtails
2521-041-06
18" Rubber
2521-041-07 36" Rubber |
|
 |
OVER
PRESSURE REGULATOR
2521-002
Marshall Single O.P.P. REG less POL |
|
 |
OVER
PRESSURE REGULATOR (AUTOMATIC CHANGE OVER)
Marshall
auto dual O.P.P. regulator
2521-030 |
|
 |
FLEXIBLE
PIGTAILS - BRAIDED
To suit
single regulators, this pigtail comes complete with an excess flow valve
in the P.O.L end.
2521-041-25 18" To suit single
regulator fitted with O.P.P. valve |
|
 |
GAS HOSES
Male SAE
x Male BSP tapered to provide flexible connection from regulator,
(MBSP), to nominated copper tube. This is a low pressure hose with AGA
approval 4126.
3/8" MSAE
x 3/8" MBSP
2525-001
300mm
2525-005
450mm
2525-009
600mm
2525-010
800mm
2525-011
900mm
5/16"
MSAE x 3/8" MBSP
2525-051
300mm
2525-055
450mm
2525-059
600mm |
|
 |
GAS HOSES
Female
flare SAE x female flare SAE. Low pressure gas hoses with AGA approval
4126.
3/8" FF x
3/8" FF
2525-021
600mm
2525-025
900mm
2525-029
1200mm
2525-031
1524mm
2525-035
1800mm
5/16" FF
x 5/16" FF
2525-063
600mm
2525-069
1200mm
2525-075
1800mm |
|
 |
GAS HOSE
SUITS
CHESCOLDCHEST TYPE FRIDGES
Female
BSP inverted flare x Male BSP tapered. 1500mm. long.
2525-101
1/4"BSPIF x 3/8"MBSP |
|
 |
BRASS
ADAPTOR
No. 62
This
adaptor is used to convert rubber pigtails used with dual / change over
regulators to be converted for use with single O.P.P. regulators less
POL.
2566-001
1/4" MBSP x 1/4"IF Union |
|
 |
PROTECTIVE HOSE FOR COPPER TUBE
Black PVC
flexible tubing used for protecting copper tube from road abuse and
abrasion. 12.5mm x 30 metre roll.
3511-050 |
|
 |
COPPER
TUBE
Annealed
copper tube suitable for gas installations. Supplied by the roll.
30 metre
rolls
2531-012
(1/4") 6.35 x 0.91mm
2531-016
(5/16") 7.95 x 0.91mm
18 metre
rolls
2531-021
(3/8") 9.52 x 0.91mm
2531-031
(1/2") 12.7 x 0.91mm |
|
  |
COPPER SADDLES
Use to
secure copper tube to chassis
2535-051
3/16" t/s 4.76mm tube
2535-052
1/4" t/s 6.35mm tube
2535-053
5/16" t/s 7.95mm tube
2535-054
3/8" t/s 9.52mm tube
2535-055
1/2" t/s 12.7mm tube |
|
 |
PLASTIC SADDLES
Used to
secure copper tubing to chassis of RV.
2536-005
(1/2") 12.7mm
2536-007
(3/4") 19mm |
|
 |
COPPER
TUBE FLARING TOOL
Flares
thin wall copper, brass and aluminium tube.
2596-001 |
|
|
NOTE:
Tube should be cut square and both
the inside & outside edges de-burred, the nut should be slipped over the
tube and then flared with a flaring tool. |
|
 |
COPPER
TUBE CUTTER
Cuts
copper, brass and aluminium tube.
2596-050 |
|
 |
YELLOW
THREAD SEAL GAS TAPE
20 metre
rolls. 12mm width. Superior, high density sealing tape.
2595-015 |
|
 |
GAS
FITTINGS - No. 6
SAE flare
nuts.
2541-011
5/16"
2541-016
3/8"
SAE reducing flare nuts
2541-116
3/8" x
5/16" |
|
 |
GAS FITTINGS - No 7
SAE male
x BSP tapered male unions.
2542-011
5/16" x 1/8" *
2542-012
5/16" x 1/4"
2542-013
5/16" x 3/8"
2542-021
3/8" x 1/8" *
2542-022
3/8" x 1/4"
2542-023
3/8" x 3/8"
*FRIDGE UNION |
|
 |
GAS FITTINGS - No 8
SAE male
x BSP male tapered elbows.
2543-012
5/16" x 1/4"
2543-013
5/16" x 3/8" |
|
 |
GAS
FITTINGS - No 16
SAE male
x BSP female unions.
2544-022
5/16" x 1/4" **
2544-023
5/16" x 3/8"
2544-032
3/8" x 1/4" **
2544-033
3/8" x 3/8"
2544-034
3/8" x 1/2"
**
TUDOR STOVE |
|
 |
GAS FITTINGS - No 17
SAE male
x SAE male double unions.
2545-021
5/16" x 5/16"
2545-031
3/8" x 3/8"
Reducing
unions
2545-058
3/8" x 5/16" |
|
 |
GAS FITTINGS - No 18
SAE male x SAE male double
elbows.
2546-021 5/16" x 5/16" |
|
 |
GAS FITTINGS - No 19
SAE all
male 3-way Tees.
2547-021
5/16"
2547-031
3/8" |
|
 |
GAS FITTINGS - No 25
BSP male
tapered x BSP female elbows.
2553-001
1/4" x 1/4" |
|
 |
GAS FITTINGS - No 70
Female
flare x female flare swivel connectors.
2571-021
5/16" |
|
 |
BALL
VALVE
BSP
female x BSP female.
2585-001
1/4" x 1/4" |
|
|
|
BALL
VALVES
Complete
with flare nuts.
2585-009
5/16" x 5/16" SAE
2585-011
3/8" x 3/8" BSP
2585-016
1/2" x 1/2" BSP |
|
 |
CHROME
FLOOR MOUNT
1/2"
female BSP x female bayonet.
2589-005 |
|
 |
CHROME
BAYONET
1/8" male
BSP tapered x male bayonet.
2589-001 |
|
|
NOTE: Flared
fittings are not supplied with flare nuts. Please order flare nuts
separately. |
| |
|
CLICK TO HOME PAGE
