 |
FOAM MATTRESS COVERS
Zippered cotton patterned covers to suit 5" foam
mattresses. Designs vary according to availability.
5031-101-01 72" x
48"
5031-101-06 74" x
54"
5031-101-10 72" x
30"
5031-101-15 80" x
54" |
|
 |
FOAM
MATTRESSES
Medium density cotton covered foam mattresses made
specifically for the RV industry. Firm. Lightweight.
5 " Thickness
5031-001 72" x
30" square corner
5031-005
72" x 48" square
corner
5031-006
72" x 48" cutaway
5031-007
74" x 54" square corner
5031-008
74" x 54" cutaway
7" Thickness
5031-009 72" x
30" square corner
5031-010
72" x 48" square
corner
5031-011
72" x 48" cutaway
|
|
 |
INNERSPRING MATTRESSES
The
standard size for a double bed mattress in most RVs, is 72" x 48", but
other sizes are available. Innerspring mattresses are available in
various qualities, based on the number of springs per mattress.
72"
x 48"
5031-020 ‘Archer’
5031-025 ‘Back Support’
5031-026 ‘Back Support’ cutaway
72"
x 54"
5031-029 ‘Back Support’ cutaway
77"
x 48"
5031-035 ‘Back Support’ cutaway
77"
x 54"
5031-036 ‘Back Support’ cutaway |
|
 |
LOTUS
CONCERTINA DOORS
The Concertina doors are made for the RV industry
and are practical and serviceable. They are available in a range of
attractive colours and patterns and feature double head track and nylon
easy slide bearings and glide runners. The size combinations are almost
endless. Listed are the most common sizes used in the industry. When
ordering always specify the actual door aperture. Other sizes can be
made on request. Measurements are width by height.
Colours: Stipple, Grey, Fawn, White
Up to 1930mm high
5035-001 813mm
wide
5035-002
914mm wide
5035-003
1067mm wide
5035-004
1219mm wide
5035-006
1372mm wide
5035-008
1524mm wide
5035-010
1676mm wide
5035-012
1829mm wide
5035-013
1981mm wide
5035-014
2400mm wide
1931mm to 2057mm high
5035-021
813mm wide
5035-022
914mm wide
5035-023
1067mm wide
5035-024
1219mm wide
5035-025
1372mm wide
5035-026
1524mm wide
5035-027
1676mm wide
5035-028
1829mm wide
5035-029
1981mm wide |
|
 |
REPLACEMENT PARTS FOR CONCERTINA DOORS
5035-101-01
Bearer and screws
5035-101-06
Glide set
5035-101-11
Holdback strap |
|
 |
POWDER
COATED CURTAIN ROD
16mm rod available in 5 metre lengths.
5042-001 White
|
|
 |
ACORN ROD ENDS
Suit 16mm and 19mm rod.
5045-045 White
5045-047 Beige
|
|
 |
SCREW HOOK & EYE
Zinc plated. To suit expanding wire.
5046-060 Eye
5046-062 Hook
|
|
 |
EXPANDING PLASTIC COATED WIRE
30 metre roll. Plastic coated stretch wire
protects fabric from snagging.
5042-011 |
|
 |
AC3 PLASTIC
MIRROR CLIP
Clear plastic clip to suit
3mm mirror.
5033-101 |
|
 |
STAYED CURTAIN BRACKETS
To accommodate plastic coated curtain rod.
5044-017 75mm -
White |
|
 |
TRIANGULAR CURTAIN BRACKETS
5044-030 Small -
White |
|
 |
MUSLIN
BRACKET
Snap in.
5044-025
White |
|
 |
ELBOW BRACKET
To
suit 16mm rod. White. Per pair.
5044-014 |
|
 |
EXPANDING VALENCE RODS
With pair of brackets.
5042-005 700 -
1220mm x 88mm
5042-007 1220 -
2150mm x 88mm
Replacement part
5044-043 Bracket
|
|
 |
ALUMINIUM
CURTAIN TRACK
Clear anodised. 5 metre
lengths. Accepts flat base runners.
5043-010
|
|
 |
NYLON CURTAIN RUNNERS
For aluminium track.
5046-050
Curved base
5046-052
Flat base
|
|
 |
JAYCO CURTAIN TABS
5046-101
|
|
 |
PLASTIC
CUPBOARD VENTS
White
5091-001
L4 145 x 230mm
5091-005
AC44 175 x 207mm
5091-012
RC6 150 x 230mm
5091-016
C5 150 x 230mm
5091-021
RL3 145 x 230mm
5091-201
127 x 76mm |
|
 |
CAFE CURTAIN CLIPS
19mm.
5046-065 White
5046-067 Brown |
|
 |
CURTAIN GATHERING HOOKS
5046-054 Steel
5046-056
Plastic |
|
 |
TOUCH TAPE
25 metre rolls.
5047-090 20mm
hook - White
5047-092 20mm
loop - White
5047-094 20mm
hook - Black
5047-096 20mm
loop - Black
5047-098 25mm
hook - White
5047-100 25mm
loop - White
5047-102 25mm
hook - Black
5047-104 25mm
loop - Black |
|
 |
BLIND PULL CORD
Replacement cord attachment for holland blinds.
5051-101-11
|
|
 |
CHROMED
CUPBOARD VENTS
Attractive polished chrome cupboard vents.
5091-152 68 x
136mm (double) |
|
 |
GATHERING TAPE
Natural. 100 metre roll.
5047-070 |
|
 |
TABLE
SUPPORT LEGS
Hinged support leg for table tops when converting
to bed base.
5055-001 305mm
5055-002 360mm
5055-003 457mm
Replacement part
5055-101-01 Nylon
hinge |
|
 |
PEDESTAL TABLE LEGS
Freestanding, sturdy table legs with an angle iron top plate for extra
support. Can be anchored to the floor for travel, but is also able to be
moved within the RV, or taken outside.
Height: 690mm
Base A: 615mm x 830mm
Base B: 615mm x 615mm
5055-017 Elongated base A
5055-019 Shortened base B
Replacement parts
5055-401-11 Chromed tube
5055-401-21 Chromed base
5055-401-05 Top cross
5055-401-41 Shroud kit
5055-401-42 Shroud only
|
|
 |
WINEGLASS TABLE LEG
A wineglass shaped leg with an angle iron split
top.
Height: 730mm
Base/plate: 420mm
5055-026 |
|
 |
TUBULAR
ISLAND TABLE LEG
The island table leg features a tapered recessed
base inset into the floor of the RV, providing a very firm fit and
steady support for the chrome tube which supports the plate to which the
table top is affixed.
Height: 655mm
Base/plate: 200mm.
5055-006
Replacement parts
5055-201-06
Chromed tube
5055-201-01 Top
plate
5055-201-11
Recessed base |
|
 |
PEDESTAL TABLE LEG
Pedestal table leg with plate top. Ideal for smaller table tops with the
same portability as all pedestal legs.
Height: 640mm
Base: 610mm
5055-018
Replacement parts
5055-401-11 Chromed tube
5055-401-02 Top plate
|
|
 |
WINEGLASS TABLE LEG
A wineglass shaped leg with plate top that is
suitable for smaller spaces.
Height: 685mm
Base/plate: 410mm
5055-027 |
|
   |
ISLAND TUBULAR TABLE LEGS
FIAMMA.
A very popular table
leg in small units where space is at a premium. Choice of an above floor
domed fixing or a recessed tapered base. Optional tripod for outdoor
use.
Height: 746mm
Base/plate: 165mm
5055-011 With
domed base
5055-012 With
recessed base
Replacement parts
5055-301-11
Chromed tube
5055-301-06 Domed
top plate/base
5055-301-01
Recessed base plate |
|
 |
TRIPOD
To
suit Fiamma table leg.
5055-301-16 |
|
 |
CAMEC
WINEGLASS TABLE LEG
Features a round re-enforced base plate that
provides maximum support for the tubular leg. It is fitted with an angle
iron top plate that makes the whole table very firm. The base can be
anchored to the floor for travelling.
Height: 700mm
Base/plate: 420mm
5055-025
Replacement parts
5055-501-01 Long
bolt & nut
5055-501-05 Grey
tube
5055-501-10 Angle
top
5055-501-11 Base |
|
 |
EAZY LIFT TABLE LEG
This telescopic table leg has an adjustable height
floor plate to allow for correct height setting when table is being used
as a bed base. Lock knob tightens a friction shim to prevent accidental
movement.
Overall height:
855mm
Closed height:
480mm
5055-031 |
|
 |
TABLE LEG CLIPS
For
storage of island table leg poles when table is not in use.
5055-201-20
|
|
 |
SWING AWAY TABLE LEG
38mm chrome tube.
Height: 740mm
Off-set: 220mm
5055-041 |
|
 |
‘V’ TYPE
TABLE LEGS
These simple chromed wire ‘V’ shape legs that lock
for vertical support, but can pivot horizontally under the table top for
ease of storage, or when the table top is being used as a bed base.
5055-061 710mm
Replacement part
5055-801-01
Plastic foot |
|
 |
FOLDING TABLE LEG
This unique table top hinge set offers versatility and portability. The
table top can be lifted from the wall bracket conveniently positioned
elsewhere on the caravan, even outdoors.
5055-076 675mm |
|
  |
BI-FOLD TABLE LEG
This unique table top hinge set offers versatility
and portability. The table top can be lifted from the wall bracket
conveniently positioned elsewhere on the caravan, even outdoors. It can
also serve as a bed base.
Height: 675mm
Bi fold: 315mm
5055-071 |
|
 |
7 PIECE TABLE HINGE SET
5061-001 |
|
 |
TABLE SLIDE KIT
Set
consists of: 2 brackets, 1 length alloy track- 950mm, 2 end plugs.
5061-301 To suit Bi-Fold & Folding
Table legs |
|
|
PRIMERO 3-STAGE HYDRA
TABLE LEG
Table height: 670mm
Bed height: 310mm
Lifting Height: 360mm
Weight: 8.5kg
(When used in sleeping position a lateral support is necessary).
5055-079
|
| |
|
|
4 WAY TABLE HINGE
Space saver, heavy duty, quality construction.
4
way spring hinge gives you the option to extend your existing table when
needed, and allowing you to fold away when extra space is needed.
5061-003 |
| |
|
 |
PLASTIC FOOT
To suit Breha pedestal table leg.
5055-401-31 |
|
|
|
 |
PLASTIC FOOT
To suit Universal pedestal table leg.
5055-401-35 |
| |
|
 |
ALUMINIUM 2 PIECE TABLE SUPPORT
Male section mounts on table. The female section attaches to the wall.
4
metre lengths
5061-025 Male section
5061-026 Female section
Per
metre
5061-205 Male section
5061-206 Female section |
| |
|
 |
TOP CROSSES
For pedestal table legs.
5055-401-05 To
suit Breha
|
CLICK TO HOME PAGE
