 |
NEW
RELEASE
Micro MK2 Door 7010
The new Micro MK2 door has a single point locking mechanism that
sits flush with door when locked. It also features a fixed flat panel in
the upper half of the outer door.
Available in the following sizes:
Height x Width
7010-1330-0572.WH 1330mm x 572mm
7010-1330-0622.WH 1330mm x 622mm
7010-1420-0572.WH 1420mm x 572mm
7010-1420-0622.WH 1420mm x 622mm
7010-1520-0572.WH 1520mm x 572mm
7010-1520-0622.WH 1520mm x 622mm
Please note. This door is available in white frame only and is limited
to the sizes mentioned above. |
|
 |
CAMEC MK1 DOOR 7001
The
CAMEC MK1 Door incorporates a full aluminium panel door.
Height x Width
7001-1540-0572 1540mm x 0572mm
7001-1623-0622 1623mm x 0622mm
7001-1690-0622 1690mm x 0622mm
7001-1750-0622 1750mm x 0622mm
7001-1822-0622 1822mm x 0622mm
7001-1908-0762 1908mm x 0762mm |
|
 |
CAMEC MK2 DOOR 7002
The
CAMEC MK2 Door incorporates a fixed flat acrylic panel in the upper half
of the outer door.
Height x Width
7002-1540-0572 1540mm x 0572mm
7002-1623-0622 1623mm x 0622mm
7002-1690-0622 1690mm x 0622mm
7002-1750-0622 1750mm x 0622mm
7002-1822-0622 1822mm x 0622mm
7002-1908-0762 1908mm x 0762mm |
|
 |
CAMEC MK4 DOOR 7004
The
CAMEC MK4 Door incorporates a Galaxy acrylic panel in the upper half of
the outer door.
Height x Width
7004-1540-0572 1540mm x 0572mm
7004-1623-0622 1623mm x 0622mm
7004-1690-0622 1690mm x 0622mm
7004-1750-0622 1750mm x 0622mm
7004-1822-0622 1822mm x 0622mm
7004-1908-0622 1908mm x 0622mm |
|
 |
TRIMATIC MKII DOORS WITH SECURITY 7015A
The
MKII TRIMATIC door incorporates a fixed flat acrylic panel in the upper
half of the outer door.
7015A-1540-0572 1540mm x 572mm
7015A-1540-0622 1540mm x 622mm
7015A-1750-0572 1750mm x 572mm
7015A-1750-0622 1750mm x 622mm
7015A-1908-0622 1908mm x 622mm
|
|
 |
TRIMATIC LOCK ASSEMBLY
Unique die-cast single lock operates both the main door and the screen
door together as a single operation, or as separate units. Individual
components are available.
7016-497-BL |
| |
|
 |
TRIMATIC INNER LOCK
Replacement inner lock incorporates locking snib.
7016-499-BL |
|
 |
TRIMATIC OUTER LOCK
Replacement outer lock incorporates a mating latch to secure outer main
door to fly door.
7016-496 |
|
 |
TRIMATIC LOCK PULL PLATE
Die-cast outer plate engages the mating latch of the outer lock to
retain the two doors as one.
7016-501-BLK |
|
 |
TRIMATIC LOCK STRIKE PLATE
Plastic strike plate is attached to fixed trim frame and allows positive
locking of both doors to the outer trim frame.
7016-500-BLK |
|
 |
AUSTRALITE VENT
165
x 520 mm. Waterproof venturi action allows full flow ventilation and
keeps out water, dust and insects. It has a minimum ventilation are of
220 square centimetres. Suits current Trimatic and Camec 3 pt locking
doors.
7016-082.BL |
|
 |
TRIMATIC WEATHER SEAL
Extruded PVC weather & bug seal attaches to the main door & trim frame
eliminating the risk of water, dust, or bugs into RV interior.
7016-522 per metre |
|
 |
TRIMATIC TREAD SEAL
Flexible PVC tread seal protects bottom trim rail and makes cleaning
easier.
7016-523 per metre |
|
 |
TRIMATIC PUSH BAR
Aluminium channel that
acts as a push bar and divides the fly door into two sections. Specify
colour. Available on request. |
| |
|
 |
TRIMATIC PUSH BAR RETAINER
Aluminium U-channel holds the push bar/fly door divider in place.
7016-791 |
|
 |
PANORAMA VENT
113
x 548mm. Suits early Panorama and Trimatic doors and dog doors.
7012-082 |
|
 |
TRIM FRAME CORNER INSERT
Aluminium corner stake secures mitred corners of trim frame.
7059-529 |
|
 |
TRIMATIC FLY DOOR CORNER STAKE
Plastic corner insert to secure mitred corners of flyscreen door frame.
7016-709 |
|
 |
TRIMATIC MAIN FRAME CORNER STAKE
2
piece plastic corner stake to secure the mitred corners of the main door
frame.
7016-531 |
|
 |
TRIMATIC EARTH STRAP
Replacement earth strap which for safety reasons must be fitted to all
doors mounted on plastic hinges.
7016-545 |
|
 |
TRIMATIC 4 piece HINGE
Unique plastic offset hinge that allows either the outer door or both
doors to be opened at the one time.
7016-631 |
|
 |
TRIMATIC FLYSCREEN SPLINE
6.0mm PVC spline retains insect mesh in groove provided in frame of
insect door extrusion.
7059-951 per metre |
|
 |
MAIN DOOR FRAME EXTRUSION
Available on request.
Please specify colour. |
|
 |
TRIM FRAME EXTRUSION
Available on request.
Please specify colour. |
|
 |
SASH LOCK ASSEMBLY
Plastic lock with locking bars as an assembly.
7012-065 |
|
 |
SASH LOCK GUIDES
Left and right-hand guides enable sash to slide smoothly and squarely
within the frame channel.
7012-069-LH Left hand
7012-069-RH Right hand |
|
 |
SCREEN SLIDE
Plastic tensioning slide for Panorama door insect screen.
7012-072 |
|
 |
PANORAMA SCREEN LATCH ASSEMBLY
7012-070
Latch - 3 parts |
|
|
|
PANORAMA VENTURI VENT
Waterproof venturi action allows full flow ventilation and keeps out
water, dust and insects.
Height: 113mm
Depth: 55mm
Width: 548mm
7012-082 |
|
 |
PANORAMA HINGE ASSEMBLY
Plastic 3 piece offset hinge assembly can be easily replaced if worn.
Three hinges are fitted to full height doors.
7012-096 |
|
 |
PANORAMA DOOR EARTH STRAP
Replacement earth strap for Panorama doors.
7012-088 |
|
 |
PANORAMA PLASTIC MAIN DOOR CORNER INSERT
Replacement corner stake to secure mitred corner of main door frame.
7012-084 |
|
 |
PANORAMA CROSS SHAFT SLIDE CHANNEL
Plastic insert to engage and lock sash locking bars in various
positions.
7012-086 |
|
 |
PANORAMA LOCK - MK II
Replacement main door lock for the Panorama MK II RV door.
7013-110 |
|
 |
PANORAMA/TRIMATIC TREAD
SEAL
Flexible PVC tread seal protects bottom trim rail and makes cleaning
easier.
7016-523 per metre |
|
 |
PANORAMA WEATHER SEAL
Continuous weather and bug seal fitted to trim frame and main frame of
door to eliminate water entry and unwanted insects.
7012-094 per metre |
|
 |
CABIN HOOK RETAINER
Plastic retainer to secure cabin hook whilst travelling.
7059-565 |
|
 |
BLIND BOLLARD TO SUIT PANORAMA DOOR
Plastic retainer attaches to bottom rail of insect screen to keep
privacy blind in the closed position.
7059-112 |
|
 |
BLIND BRACKETS
Blind brackets for the Trimatic and Panorama doors are available as a
set.
7059-111 |
|
 |
CABIN HOOK & EYE
200mm chrome cabin hook retains main door in open position.
5157-016 |
|
 |
ANNEXE PROTECTOR
Plastic roller fits to leading edge of main door to protect
annexe/awning from damage.
7059-501 |
|
 |
INTERNAL TRIM
Plastic moulding to trim the internal flashing for Panorama and Trimatic
doors. Sold by the 4.38 metre length.
7059-135 |
|
 |
ALUMINIUM EXTRUSION
TOUCH-UP PAINT
Available in black, grey and white powder coat, and clear, dark bronze
and light bronze anodised. Please specify colour.
7059-020 Anodised Colours
7059-030 Powder Coated Colours
|
|
 |
VENTED ACCESS DOORS 7021
Fully framed and vented access door ideally suited for storage of gas
cylinders, batteries, etc. Please specify hinge side, frame colour and
infil colour.
7021-0330-0457 330mmx457mm
7021-0340-0340 340mmx340mm
7021-0492-0350 492mmx350mm
7021-0492-0645 492mm x 645mm
7021-0645-0492 645mm x 492mm
7021-0645-0645 645mm x 645mm
7021-0775-0560 775mm x 560mm |
|
 |
LAMINATED ACCESS DOORS
7021A
Fully framed, laminated panel door. Please nominate frame colour,
hinging and infill colour.
7021A-0340-0340 340mmx340mm
7021A-0445-0408 445mmx408mm
7021A-0492-0350 492mmx350mm
7021A-0520-0350 520mm x 350mm
7021A-0645-0492 645mm x 492mm
7021A-0645-0645 645mm x 645mm
7021A-0762-0457 762mm x 457mm |
|
 |
2-RADIUS CORNER BOOT
STORAGE DOORS
The
standard boot door is a laminated aluminium panel fitted with telescopic
stays.
7024-105 380mm x 1524mm
7024-115 450mm x 1175mm
7024-120 450mm x 1524mm
|
|
 |
2-RADIUS CORNER G.V.Z.
BOOT STORAGE DOORS
This ultimate boot door is protected from damage by a foam backed vinyl
padded material laminated to the door which is fitted with gas struts to
provide ease of use.
7024-215 565mm x 1524mm
7024-220 450mm x 1524mm
|
|
|
|
2-RADIUS CORNER G.A.Z.
BOOT STORAGE DOORS
The
G.A.Z. boot door is the standard laminated aluminium panel door fitted
with gas struts.
7024-226 450mm x 1524mm
7024-228 565mm x 1524mm
|
|
 |
MINI DOOR CYLINDER LOCK
Replacement lock for mini access doors.
7059-622-09 |
|
 |
2 RADIUS CORNER MINI
LAMINATED DOORS 7023A
Solid panel, laminated access doors, ideal for stowage of any item not
suitable for internal storage. Can only be made with hinge extrusion on
opposite edge to radius corners.
Height x Width
7023A-0230-0457 230mm x 457mm
7023A-0230-0762 230mm x 762mm
7023A-0280-0457 280mm x 457mm
7023A-0280-0762 280mm x 762mm
7023A-0280-0914 280mm x 914mm
7023A-0380-0762 380mm x 762mm |
|
 |
MINI DOOR HINGE
Semi concealed lightweight, non-rusting, aluminium hinge for mini access
doors.
7059-623 |
|
 |
2 RADIUS CORNER MINI
VENTED DOORS 7023
Vented access doors with continuous hinge ideal for gas bottle storage
compartments, battery boxes, etc. Only made as top hinged.
7023-0230-0500 230mm x 500mm
7023-0280-0457 280mm x 457mm
7023-0280-0762 280mm x 762mm
7023-0301-0485 301mm x 485mm
7023-0301-0638 301mm x 638mm
7023-0330-0485 330mm x 485mm
7023-0341-0485 341mm x 485mm
|
|
 |
EXTERNAL SCREW COVER
PVC
mould. Fits into SERIES 300 extrusion concealing fixing screws. 4 metre
lengths.
7059-155 |
|
 |
BOOT STORAGE DOOR LOCK KIT
Replacement ‘T’ handle with threaded shaft for boot doors.
7059-614 |
|
 |
LOCKING RODS & BRACKETS
To
suit 1524mm wide boot door and operate with threaded ‘T’ handle lock.
7059-616 |
|
 |
GAS
STRUT KIT FOR BOOT DOORS
A
complete kit to convert telescopic stayed boot door to gas strut
operation.
7059-619 |
|
 |
FLYSCREEN MESH
50
metre rolls of quality black screen mesh.
7059-910 610mm wide
7059-912 910mm wide
7059-915 1220mm wide
|
|
 |
REMINGTON PROTECTOR
SHADE 7067
The New Remington Protector Shade suits all glass and galaxy
windows.
7067-0390-1226 t/s 380mm x 1175mm
7067-0390-1575 t/s 380mm x 1524mm
7067-0460-0661 t/s 450mm x 610mm
7067-0460-1226 t/s 450mm x 1175mm
7067-0460-1575 t/s 450mm x 1524mm
7067-0518-1226 t/s 508mm x 1175mm
7067-0518-1575 t/s 508mm x 1524mm
7067-0575-0508 t/s 565mm x 457mm
7067-0575-1226 t/s 565mm x 1175mm
7067-0575-1575 t/s 565mm x 1524mm |
|
 |
CURVED 2-RADIUS CORNER
PROTECTOR SHADES
These curved shades suit the GALAXY and BUBBLE window sizes as listed
below:
7065-0305-0508 280mm x 457mm
7065-0305-0813 280mm x 762mm
7065-0305-0965 280mm x 914mm
7065-0305-1226 280mm x 1175mm
7065-0305-1575 280mm x 1524mm
7065-0405-0813 380mm x 762mm
7065-0405-0965 380mm x 914mm
7065-0475-0813 450mm x 762mm
7065-0475-0965 450mm x 914mm
7065-0533-0508 508mm
x 457mm
7065-0533-0813 508mm
x 762mm
7065-0533-0965 508mm
x 914mm
7065-0590-0661 565mm x 610mm
7065-0590-0813 565mm x 762mm
7065-0590-0965 565mm x 914mm |
|
 |
REGULAR 2 RADIUS CORNER
PROTECTOR SHADES
The
following protector shades are made to suit windows of the nominated
sizes:
7061-0290-0508 280mm x 457mm
7061-0290-0813 280mm x 762mm
7061-0290-0965 280mm x 914mm
7061-0290-1226 280mm x 1175mm
7061-0290-1575 280mm x 1524mm
7061-0390-0813 380mm x 762mm
7061-0390-0965 380mm x 914mm
7061-0390-1226
380mm x 1175mm
7061-0390-1575 380mm x 1524mm
7061-0460-0661 450mm x 610mm
7061-0460-0813 450mm x 762mm
7061-0460-0965 450mm x 914mm
7061-0460-1226 450mm x 1175mm
7061-0460-1575
450mm x 1524mm
7061-0518-0508 508mm x 457mm
7061-0518-0813 508mm x 762mm
7061-0518-0965 508mm x 914mm
7061-0518-1226 508mm x 1175mm
7061-0518-1575 508mm x 1524mm
7061-0575-0508 565mm x 457mm
7061-0575-0661
565mm x 610mm
7061-0575-0813 565mm
x 762mm
7061-0575-0965 565mm
x 914mm
7061-0575-1226 565mm
x 1175mm
7061-0575-1575 565mm
x 1524mm
7061-0747-1575 737mm
x 1524mm
The
following protector shades are made to cover the complete width of the
caravan.
7061-0575-1829
575mm x 1829mm
7061-0575-2083
575mm x 2083mm
7061-0575-2337
575mm x 2337mm
|
|
 |
PROTECTOR SHADE HOLD DOWN CATCH
A 2
piece security catch that locks the shade for travel.
7069-700 |
|
 |
PROTECTOR SHADE 3/16" KNURLED NUT
Replacement knurled nut for protector shade stays. - 20mm OD.
7069-710 |
|
 |
PROTECTOR SHADE STAYS
7069-707
250mm
7069-708 200mm
7069-709 100mm
|
|
 |
PROTECTOR SHADE HINGE
EXTRUSION
Aluminium hinge extrusion
fixes to shade and engages in drip mould. Available on request. Please
specify colour. |
|
 |
PROTECTOR SHADE DRIP
MOULD
Aluminium extrusion that
acts as a drip mould and a hinge for shades. Available on request.
Please specify colour. |
|
 |
THE AUSTRALITE FOUR
SEASONS HATCH
The
Four Seasons Hatch features 161 square centimetres of fixed ventilation
- even when closed. This roof hatch complies with gas codes, and is
totally waterproof during rain, with flaps in 'open' rain position. Four
independently adjusted, flyscreened flaps secure breeze from any
direction. Screens are easily removed for cleaning.
The
complete assembly is ready for installation into a 660mm x 660mm
aperture. Available in white, with the option of either single or double
glazed skylights. ITEM DOES NOT INCLUDE INTERNAL FRAME.
7071-005-WH White
7071-110-WH White with single glazed
skylight
7071-210-WH White with double glazed
skylight
7073-640 Internal frame to suit 4
seasons hatch white - 50mm
7073-641 Internal frame to suit 4
seasons hatch white - 75mm
FAQ |
|
 |
SHADE ASSEMBLIES
Double skin replacement shade assembly for Four Seasons Hatch.
7073-608 White - standard
7073-609 White - ‘FRONT’ |
|
 |
4-SEASONS HATCH INSECT SCREEN
Replacement insect screen.
7073-432 |
|
 |
4-SEASONS LIFT MECHANISM
Winding mechanism and fastening clip for each shade assembly.
7073-606 |
CLICK TO HOME PAGE
